Product images are for illustration purposes and may differ in details.
Product number:
142632
Product files available on request!
Product information "Thread Milling Insert TrioCUT 12 55°"
TrioCUT is characterized by smooth cutting and low cutting pressure resulting in high surface quality and long tool life. A conical position of the insert pocket guarantees a highly stable tool shank. Further advantages are the radially back-ground thread profile for an extremely large wedge angle as well as a stable cutting edge.
The optimal field of application is fine threads and/or very short thread lengths.
In size 17, versions are available with a drilling edge that allow the core hole to be produced using the drill-milling process.
The optimal field of application is fine threads and/or very short thread lengths.
In size 17, versions are available with a drilling edge that allow the core hole to be produced using the drill-milling process.
| pitch [mm]: | 1,814 |
|---|---|
| Threads Per Inch (TPI): | 14 |
| Cutting diameter D [mm]: | 12 |
| type of profile: | Full profile |
| Type of thread: | Internal and External Thread |
| Type: | TrioCUT 12 |
| Number of teeth: | 6 |
| Rake angle: | 11° |
| L P2 [mm]: | 0,9 |
| TrioCUT size: | 12 |
| H P [mm]: | 7,5 |
| thread profile: | 55° |
| thread standard: | DIN 228/1 / BS84 |
| thread direction: | Right & Left hand Thread |
| Coating: | Tinamatic |
| substrate: | FKN |
| area of application: | Universal ≤54HRC |
Before use, the machine must be checked for any potential interference contours caused by the tool. We do not accept any liability for any resulting damage.
|
P (Steel)
|
M (Stainless Steel)
|
K (Cast Iron)
|
N (Non-ferrous metal)
|
S (Super-alloys and Titanium)
|
H (Hard material)
|
O (Others)
|
|
|---|---|---|---|---|---|---|---|
| Vc | |||||||
| fz |
Zubehör
Circular Milling Body TrioCUT 12 d h6 16HB L1=18
123620
TrioCUT is characterized by smooth cutting and low cutting pressure resulting in high surface quality and long tool life. A conical position of the insert pocket guarantees a highly stable tool shank. Further advantages are the radially back-ground thread profile for an extremely large wedge angle as well as a stable cutting edge.The optimal field of application is fine threads and/or very short thread lengths. In size 17, versions are available with a drilling edge that allow the core hole to be produced using the drill-milling process.
Einzelpreis: €207.90*