Product images are for illustration purposes and may differ in details.
Product number:
171598
Product information "Thread Milling Cutter SolidCUT Standard 60° 2xD Chamfer HA"
"The multi-tooth thread mill ""Classic"", ideal for short thread lengths, small pitches and very rigid clamping of both the workpiece and the cutter.
Easy to use, these indexable inserts can also be used in bell-type milling cutters."
Easy to use, these indexable inserts can also be used in bell-type milling cutters."
| pitch [mm]: | 2,540 |
|---|---|
| Threads Per Inch (TPI): | 10 |
| Thread range: | 3/4 |
| Cutting diameter D [mm]: | 15,2 |
| type of profile: | Full profile |
| Type of thread: | Internal Thread |
| Type: | SolidCUT Standard |
| Number of cutting edges: | 5 |
| Number of teeth: | 16 |
| Rake angle: | 8° |
| Internal Coolant supply: | axial |
| Type of design: | 2xD |
| thread profile: | 60° |
| thread standard: | ASME B 1.1 |
| thread direction: | Right & Left hand Thread |
| Coating: | Tinamatic |
| substrate: | Solid Carbide |
| area of application: | Universal ≤54HRC |
| d h6 [mm]: | 20 |
| L [mm]: | 110 |
| L1 [mm]: | 40,6 |
| Helix angle: | ~13°R |
Before use, the machine must be checked for any potential interference contours caused by the tool. We do not accept any liability for any resulting damage.
|
P (Steel)
|
M (Stainless Steel)
|
K (Cast Iron)
|
N (Non-ferrous metal)
|
S (Super-alloys and Titanium)
|
H (Hard material)
|
O (Others)
|
|
|---|---|---|---|---|---|---|---|
| Vc | |||||||
| fz |